A mod kit for the power supply? Yes! Use this unique power supply mod to make it look cool. Now there is no need to pay extra for a pre-colored powersupply. It also comes with 9cm Corner Fan Hole. These mods are easy to install and come in 5 colors - Dark Blue, Smoked, Clear, Neon Pink. This is a great addition to any case with a window.

Note: (1) This mod will increase the outside dimension of your power supply slightly. Be sure to unplug the power supply and wait 5-10 minutes for the capacitors to discharge. Removing the cover may void PC manufacturer warranty. (2) This product would be especially useful for all-clear cases and cases with top windows. (3) This product would also be nice for adding lighted fans inside a power supply. (4) This product is for the cover only. Power supply as shown in the above picture is not included.


Specification: Top Hole location

These covers are made of 1/8 thick cast acrylic. The inside dimensions are 2 15/16 tall x 5 13/16 wide x 5 9/16 deep. This cover is designed to replace the metal cover for PSU's with top mounted fans that are located where specified in the diagram. This includes most Antec and Enermax PSU's. Also will mount an extra fan in PSU's that don't come with one but have enough room inside. Most fans are 25mm thick so make sure you have at least 1 inch of vertical room. This can be easily checked by opening your PSU. WARNING!! This will void your warranty. On the upside, this will help your PSU run cooler which should help it last longer. The cover attaches with double sided black foam tape. The reason for this is that the hole pattern in PSU's are different from one manufacturer to another. The foam tape works extremely well and will not fall off. Includes 6 inch black zip tie to secure strain relief. This mod will increase the ouside dimensions of your PSU 1/8 in height and 1/4 in width so make sure you have enough room. Make sure there is a little clearance around your power supply in your case. If there is no room you can always adjust the mounting holes a little to make it fit.

Included in kit: Acrylic cover, 4 pieces of double sided tape, 1 zip tie, PSU Mod Installation Guide.

Below shows another model NOT being offered - COLOR SAMPLES ONLY -
8 colors shown: Neon Green, Neon Pink, Purple, Clear, Dark Blue, Light Blue, Smoked or Orange.